The ¾” “Sirio” thermostatic exposed bath/shower mixer is made in 4 configurations as described below:
1 - Art. SIRBSC – Wall mounted bath/shower mixer.
The water inlet connections are made by compression
end for 22 mm diameter pipes (or 15 mm diameter).
On demand it is also available the connection
with ½”x ¾” male eccentric nipples and ¾” female
hexagonal nuts.
2 - Art. SIR02C – Bath tub filler with hand
shower on a cradle. Unit supplied with high
eccentric ¾” legs for rim fixing or for external
floor pipes.
3 - Art. SIRSC – Shower mixer wall mounted.
The water inlet connections are made by compression
end for 22 mm diameter pipes (or 15 mm diameter).
On demand it is also available the connection
with ½”x ¾” male eccentric nipples and ¾” female
hexagonal nuts.
4 - Art. SIRSXC – Shower mixer plus side body-jets.
In this application the bath spout is replaced
by an articulated 90° elbow which takes the
mixer water back to wall for ramification to
the four body –jets; normally two body-jets
on each side of the shower cubicle (see sketch
enclosed). The four body-jets are not supplied
with the shower mixer valve.
